100

Heavy Duty Hydraulic Submersible Slurry Pump

NUMBER ONE FOR RELIABILITY, STRENGTH & ENDURANCE

100mm heavy duty pump with a replaceable casing suitable for use in a traditional suspended installation.

Single piece cast iron body to enhance rigidity and reduce wear
Bearings run in oil bath for lubrication and cooling
Twin volute casing design to reduce rotational imbalance and increase lifetime of bearings and seals
Rotating inducer creates hydrodynamic shock waves to re-suspend settled particles beneath the pump inlet
Replaceable wet end components made from carefully chosen wear resistant alloys to create a heavy duty, long lifetime wet end
Single stage, open vane impeller
Precision bearings
Non pressurised mechanical seal
Bent axis swash plate piston motor available in drainless or heavy duty (with case drain) configurations

Design fluid handled	Slurry
Maximum fluid SG	2.0 kg/l (2.8 kg/l with heavy duty motor)
Maximum fluid solids content	65 % by weight
Maximum particle size	32 mm
Maximum fluid temperature	90 °C
Recommended pH range	4-10
Weight	425 kg
Outlet diameter	100 mm
Maximum flow	230 m³/hr @ 1500rpm
Maximum head	51m (5.0 bar) @ 1800rpm
Impeller diameter	320 mm
Impeller tip speed	24 m/s @ 1800rpm
Peak efficiency	62%
Maximum submergence depth*	28 m
Motor displacement	63cc
Speed range	1200 - 1800rpm

*As standard, can be deeper if required.

Hydraulic service live ports

SAE J518 Code 62 3/4 inch (6000psi)

Allowable hydraulic pressure

Standard Motor (drainless) 250 bar
Heavy Duty Motor (with case drain) 400 bar

Hydraulic service drain port

3/4 inch – 16UNF-2B

Required hydraulic oil supply