Enquire Now

100 XP

Heavy Duty Hydraulic Submersible Slurry Pump

NUMBER ONE FOR RELIABILITY, STRENGTH & ENDURANCE

100mm heavy duty pump with a replaceable casing and drainless motor suitable for use as an excavator attachment. For use with an excavator rated at 10-25t.

  • Single piece cast iron body to enhance rigidity and reduce wear
  • Bearings run in oil bath for lubrication and cooling
  • Twin volute casing design to reduce rotational imbalance and increase lifetime of bearings and seals
  • Rotating inducer creates hydrodynamic shock waves to re-suspend settled particles beneath the pump inlet
  • Single stage, open vane impeller
  • Precision bearings
  • Non pressurised mechanical seal
  • Bent axis swash plate piston motor without case drain

Pump Data

Design fluid handledSlurry
Maximum fluid SG2.0 kg/l
Maximum fluid solids content55% by weight
Maximum particle size32 mm
Weight525 kg
Maximum fluid temperature90 °C
Recommended pH range4-10
Outlet diameter100 mm
Maximum flow230 m3/hr @ 1500rpm
Maximum head51 m (5.0 bar) @ 1800rpm
Impeller diameter320 mm
Impeller tip speed24 m/s @ 1800rpm
Peak efficiency62 %
Maximum submergence depth*28 m
Motor displacement63cc
Speed range1200 - 1800rpm

*As standard, can be deeper if required.

Other Data

Hydraulic service live ports

SAE J518 Code 62 3/4 inch (6000psi)

Allowable hydraulic pressure

250 bar

Hydraulic service drain port

3/4 inch – 16UNF-2B

Required hydraulic oil supply
RPM Water Slurry SG 2.0 Kg/l
1200rpm 73 Litres per minute @ 65 bar 73 Litres per minute @ 130 bar
1500rpm 93 Litres per minute @ 98 bar 93 Litres per minute @ 196 bar
1800rpm 108 Litres per minute @ 125 bar 108 Litres per minute @ 250 bar

Dimensions

Pump Curve